Product: ±220V DC Input Industrial PC ATX 1U Power supply (100mm width) |
|
|
Series
| Model No.
| Output Watts
| Input Voltage | Input Range
| Polarity Protection
| 220
| STC-220650I
| 650W continuous | ±220V DC
| ±190V ~ ±260V DC
| Protected (Max. 500V DC)
| 220 | STC-220450I | 450W continuous | ±220V DC | ±190V ~ ±260V DC | Protected (Max. 500V DC) |
ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling, 40x40x28mm Fan x 2 (Two Ball Bearing)● Fan Noise level: 65dBA @ Full Load (for STC-220450I) ● Fan brand: DELTA, NMB, SUNON, SUNON IP68 (for H version). Specifications are equivalent ● Operating Temperature: 0°C ~ +50°C Full Load -30°C~+60°C Full Load * optional H version (Black color chassis) ● Operating Humidity: 20%~85% RH Non condensing 90% RH Non condensing * optional H version (Black color chassis)● Storage Temperature: -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
● Input connector type: 40A/ 300V Table type single Terminal x 2
● Input Current: 2.8A/3.9A(650W) 2A/2.7A(450W) @Full Load High Line& Low Line
● Inrush Current: Less than 6A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS: Output Voltage | Regulation | Output Current | Ripple & Noise | Load | Line | Cross | 450W | 650W | Min. | Max. | Min. | Max. | +5V | ±5% | ±1% | ±5% | 0A | 40A | 0A | 25A | 50mV | +12V | 0A | 30A | 1A | 48A | 120mV | +3.3V | 0A | 22A | 0.5A | 22A | 50mV | -12V | ±8% | 0A | 0.3A | 0A | 0.3A | 120mV | +5VSB | ±5% | 0A | 2.5A | 0.1A | 2.5A | 50mV | Max continuous combined load on +3.3V & +5V and 12V DC output shall not exceed | 420 | 620 | Watt
| Max continuous total DC output power shall not exceed | 450 | 650 |
OVERALL PERFORMANCE:● Efficiency: 85% typical @220V DC Input Full Load● Hold up time: ● Rise time:● Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min● Short Circuit Protection (SCP): All output equipped with SCP (shutdown and latch off)● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdn and latch off)● Over Voltage Protection (OVP): +3.3V@4.5V, +5V@6V, +12V@15.6VRELIABILITY:● MTBF (Mean Time Between Failure): >70 000 hours @max. Load, 220V DC & 25°C ambient● Safety Standards: Meet IEC60950-1, EN60950-1, meet EN62368● Safety Approved: ● EMI Compatibility (EMC) Standard: EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014, EN61000-3-3:2013, EN55024:2010 +A1:2015 ISOLATION: ● INPUT and OUTPUT are isolated by transformers and optical couplers● Dielectric Withstand INPUT to OUTPUT: 2500V DC for 60 seconds● Dielectric Withstand INPUT to frame GROUND: 2500V DC for 60 seconds● Leakage Current: <0.005μA @220V DCOutput Connector specific:● ATX 24 Pin x1 Molex 29-01-2240 or equivalent● +24V(P4) 4 Pin x1 Molex 39-01-2040 or equivalent● HDD, DVD 4 pin x7 Molex 8981-04P or equivalent● FDD 4 pin x1 AMP 171822-4 or equivalent● Serial ATA x2 Molex 675820000 or equivalent● CPU EPS 8 Pins x 1 Molex 39-01-2080 or equivalent ● PCIe 12V 6+2 pin x 2
Standard Output Cable Length:
● 550 mm ±50 mm / 21.6 inches
PCB specific: ● 2 layer / STC-220450I ● 6 layer / STC-220650I ● Copper: 3 Oz ● Thickness: 1.6 mm ● Material: FR4 ● PCB material origin: Taiwan
Power Chassis Dimension:
● 240(L) x 100(W) x 40,5(H) mm / 9.44(L) x 3.94(W) x 1.59(H) Inches
Net Weight:
● 2.0 kg / 4.41 Lbs / STC-220450I● 2.2 kg / 4.85 Lbs / STC-220650I
Gross Weight:
● 2.1~2.4 kg / 4.63~5.29 Lbs
Packing Detail:
● 8 pcs N.W.: 16 kg / 35.27 Lbs G.W.: 18 kg / 39.68 Lbs / STC-220450I ● 8 pcs N.W.: 17.6 kg / 38.8 Lbs G.W.: 20 kg / 44.09 Lbs / STC-220650I
Measurement of Carton:
● 0.049 m³ / 1.73Cuft Optional Input Connector pictures:
SPECIFICATIONS:
|
Dealer: Synoceantech |
|
Add to collections |
|
|
|