ENVIRONMENTAL CONDITIONS:● Cooling:
Forced Air-cooling, 80x80x25 mm Fan x 2 PCs
● Fan type:
DC type, 2 x Ball Bearing, 6200 r.p.m., Optional Fan Control Card
● Fan Noise level:
40 dBA (DELTA Fan brand Official Data at 4000 r.p.m. 46.62 CFM) @ Full Load
● Fan Noise level tested:
58 dBA @ Distance 1m (DELTA Fan brand at 4000 r.p.m. 46.62 CFM) @ Full Load
● Fan brand:
DELTA, NMB, SUNON. Specifications are equivalent
● Operating Temperature:
-30°C ~ +60°C Full Load
● Output Power:
100% @ 60°C, 70% @ 65°C, 50% @ 70°C
● Operating Humidity:
20%~85% RH. (Non condensing) (95% RH Optional)
● Storage Temperature:
-20°C~+80°C
● Storage Humidity:
10%~90% RH. (Non condensing)
● Operating Altitude:
10M Below Sea level and 3000M Above Sea level
● Input connector type
RL9080-101-F1 & RL9-080-101-RED Terminals
● Input Current
107A/192A(1500W) @Full Load High Line & Low Line
● Inrush Current
Less than 200A Cold start @25°C ambient
OVERALL PERFORMANCE:● Efficiency
71% typical @12V DC 20% Load
72% typical @12V DC 70% Load
71% typical @12V DC 100% Full Load
● Hold up time
The output voltage stays regulated for at least 16ms with 100% load after loss of DC input
● Rise time
The output voltage rise from 10% to 90% with full load shall be in 20ms maximum
● Power Good Signal
TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP)
All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP)
Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)
+3.3V@4.5V, +5V@6V, +12V@15.6V
● MTBF (Mean Time Between Failure):
>90,000 hours @max. Load, 12V DC & 25°C ambient
● Safety Standards:
Meet IEC 62368-1, EN 62368-1
● EMI Compatibility (EMC) Standard:
EN 55032:2015/AC:2016, CISPR 32:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010 +A1:2015
● INPUT and OUTPUT
are isolated by transformers and optical couplers
● Dielectric Withstand:
INPUT to OUTPUT: 500V DC for 60 seconds
● Dielectric Withstand:
INPUT to frame GROUND: 500V DC for 60 seconds
● Leakage Current:
<0.005μA @ 12V DC
| Connector type x Quantity | Connector model | Wire length |
| ATX 24 pin x 1 | Molex 29-01-2240 or equivalent | 600 ± 50mm |
| HDD, DVD 4 pin x 1 | Molex 8981-04P or equivalent | 750 ± 50mm |
| Serial ATA x 6 | Molex 675820000 or equivalent | 1100 ± 50mm |
| CPU EPS 8 pin x 1 | Molex 39-01-2080 or equivalent | 600 ± 50mm |
| 12V-2x6 x 1 600W ATX 3.1 compliant | | 800 ± 50mm |
PCB specific:● 4 layer
● Copper: 3 Oz each layer
● Thickness: 1.6mm
● Material: FR4
● PCB material origin: Taiwan
Power Chassis Dimension:● 370(L) x 150(W) x 86(H) mm / 14.57(L) x 5.9(W) x 3.39(H) Inches
Net Weight:● 6.5 kg / 14.33 lbs
Gross Weight:● 6.8 kg / 14.99 lbs
Packing Detail● 2 PCs / Carton
● G.W. 14 kg / 30.86 lbs
Measurement of Carton● 0.0538 m3 / 1.9 Cuft
Input Connector Terminal Pictures:RL9080-101-F1 & RL9-080-101-F1-RED
OPTIONAL CONNECTION WIRES: (use 2 wires in parallel for each port)●
2 x single wires in parallel, 2AWG, UL1015, standard length 3m (optional length is available)
SPECIFICATIONS:
DOWNLOAD_specification_4UATX_STC-121500H-RAV_370mm.pdf DOWNLOAD_connector_specification_RL00801-35BK.pdf DOWNLOAD_connector_specification_RL00801-35RE.pdf DOWNLOAD_connector_specification_RL9-080101F1RED.pdf DOWNLOAD_connector_specification_RL9080-101-F1.pdf Mechanical_drawing_STC-121500H-RAV-20260526.pdf 
