Product: 13.8V/27.6V DC Fanless Switching Mode Battery Charger
Category: Fanless Battery charger
13.8V/27.6V DC Fanless Switching Mode Battery Charger
SeriesModel No.Output WattsInput VoltageMax Inrush currentFrequency
ACSTC-X70173 Watts110/220V AC80A/40A@220V AC/ 110V AC47~63 Hz
ACSTC-X80173 Watts110/220V AC80A/40A@220V AC/ 110V AC47~63 Hz

ENVIRONMENTAL CONDITIONS:
● Cooling:
Natural convection
● Temperature sensor:
85°/95°/105° Celsius
● Operating Temperature:
0°C ~ +50°C Full Load
● Operating Humidity:
20% ~ 85% RH. (Non condensing)
● Storage Temperature:
-20°C ~ +80°C
● Storage Humidity:
10% ~ 90% RH. (Non condensing)
● Operating Altitude:
Sea level to Above Sea level 4000M

DC OUTPUT CHARACTERISTICS:
Model No.STC-X70STC-X80
Output system voltage (VDC)12~14.827.6
Maximum load (Amps) (Constant current)12.56.25
Minimum load (Amps)0.20.2
Ripple/Noise (mV)140290
Line regulation±1%±1%
Load regulation±3%±3%
Maximim output not exceed173W173W

OVERALL PERFORMANCE:
● Efficiency:
80% typical @110/230V AC Full Load
● Short Circuit Protection (SCP):
All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP):
Peak power protected to 130~150% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP):
+12V@ 15.6~16.8V DC/ +24V@ 31.2~33.6V DC
● Auto off charger protection:
When the battery full load, the charger will not load to battery

RELIABILITY:
● MTBF:
75 000 hours @Max.Load, 110/220V AC @25°C
● Safety Standards:
Meet IEC 60950-1, EN 60950-1
● Safety Approved:
● EMI Compatibility Standard:
EN 55032:2015/AC:2016, CISPR 32:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010 +A1:2015

ISOLATION:
● Transformer Isolation:
INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand:
INPUT to OUTPUT: 1500V AC for 60 seconds
● Dielectric Withstand:
INPUT to frame GROUND: 1500V AC for 60 seconds
● Leakage Current:
<0.005μA @ 264V AC

Auto shutdown Temperature sensor protection:
● Temperature sensor:
95 degree Celsius, auto recovery

Output Device Connector Specific:
● Output Connector:
One set Red and Black 10AWG UL 1007 with Y type connector

Standard Output Cable Length From Chassis:
● 200 mm / 7.87 Inches

Power Chassis Dimension:
● 180(L) x 110(W) x 71(H) mm / 7.087(L) x 43.30(W) x 27.95(H) Inches

Net Weight:
● 1.4 kgm / 3.086 Lbs

Gross Weight:
● 1.6 kgs / 3.526 Lbs

Packing Detail:
● 8 pcs and 12pcs optional

Measurement of Carton:
● 0.0425 m³ / 1.5 Cuft

SPECIFICATIONS:

DOWNLOAD_specification_charger_STC-X70-X80.pdf

DOWNLOAD_drawing_STC-X70D-20250711.pdf
Dealer: Synoceantech
Add to collections
Statistics