| Product: ±12V DC 1U openframe single output DC to DC Power Supply 120W |
|
|
Series
| Model No.
| Output Watts
| Input Voltage | Input range
| Polarity Protection
| 12
| STC-1210005U
| 100W continuous | ±12V DC
| ±9V~±17V DC
| Protected 12V/(50V DC)
| 12
| STC-1210012U | 100W continuous | ±12V DC | ±9V~±17V DC | Protected 12V/(50V DC) | 12
| STC-1212019U | 120W continuous | ±12V DC | ±9V~±17V DC | Protected 12V/(50V DC) | 12
| STC-1212024U
| 120W continuous | ±12V DC | ±9V~±17V DC | Protected 12V/(50V DC) |
ENVIRONMENTAL CONDITIONS:
● Cooling: Nature convection with U bracket heatsink
● Operating Temperature: 0°C~+50°C (Full Load)
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature: -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude: 10M Below Sea level to 3000M Above Sea level
DC INPUT CHARACTERISTICS:
● Input connector type: 30A/300V UL Approved 3-Pin Terminal
● Input Current: 13.5A/6.6A(100W) 16A/8A(120W) @Full Load High Line & Low Line
● Inrush Current: Less than 10A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
| Output Voltage | Regulation | Output Current | Ripple & Noise | | Load | Line | Cross | 120W | 100W
| | Min. | Max. | Min.
| Max.
| | +5V | ±5% | ±1% | ±5% |
|
| 0.2A | 20A | 50mV | | +12V |
|
| 0.2A | 8.3A
| 120mV | | +19V | 0.2A | 6.3A |
|
| 190mV | | +24V | 0.2A | 5A |
|
| 240mV | | Total output power | 120W |
100W
|
| | All output voltage is optional, please add output voltage on the end of model # you need |
OVERALL PERFORMANCE:
● Efficiency: 80% typical @12V DC Full Load
● Hold up time:
● Rise time:
● Power Good Signal:
● Short Circuit Protection (SCP): All output with SCP (shutdown and latch off)
● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdn and latch off)
● Over Voltage Protection (OVP): +5V, +12V, +19V, +24V DC & 25°C each unit output voltage
RELIABILITY:
● MTBF (Mean Time Between Failure): >50 000 hours @max. Load, 12V DC & 25°C ambient
● Safety Standards: Meet IEC60950-1, EN60950-1
● Safety Approved:
● EMI Compatibility (EMC) Standard: EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014,
EN61000-3-3:2013, EN55024:2010 +A1:2015
ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand INPUT to OUTPUT: 1500V DC for 60 seconds
● Dielectric Withstand INPUT to frame GROUND: 1500V DC for 60 seconds
● Leakage Current: <0.005μA @12V DC
COMPONENT INGREDIENT:
|
Components
|
Material
|
Supplier
|
Country of original
|
|
PCB
|
FR4
2 OZ
cooper
3 OZ
Copper
|
Nan
Ya PCB Corp.
|
Taiwan
|
|
MOSFET/
Transistor
|
|
Vishay(IR)
|
USA
or other investment countries
|
|
Transformer
|
|
Li
Lian Electronic Co., Ltd.
|
Taiwan
|
|
E.
Capacitor
|
LESR
-40C~105 Celsius
or
~+125 Celsius
|
Nippon
Chemi-con, Hitachi,
Nichicon, Rubycon
|
Japan
or investment countries
|
|
DC
Output Cable
|
+105 Celsius
|
Yun
Hua Co., Ltd. LR98897
|
Taiwan
|
Input & Output Device Connector Specific:
● Connector type: 25A/300V UL Approved 8-Pin Terminal
Power Chassis Dimension:
● 172(L) x 98(w) x 40(H) mm
Net Weight (1 pc):
● 0.8 kgs
Gross Weight (1 pc):
● 1.5 kgs
Packing Detail:
● 16 pcs
Measurement of Carton (16 pcs):
● 2.13 Cuft● 47 x 34 x 37.8 cm ● GW 13.5 kg
SPECIFICATIONS: |
| Dealer: Synoceantech |
|
| Add to collections |
|
|
|
