Synocean

12V DC Industrial PC SFX Power Supply

Series	Model No.	Output Watts	Input Voltage	Input range	Polarity Protection
12	STC-12260SFX	260W	12VDC	9VDC~17VDC	No

ENVIRONMENTAL CONDITIONS:
●    Cooling:                           Forced Air-cooling, 60x60x25 mm Fan x 1 (With Two Ball Bearing)
●    Operating Temperature:    0°C ~ +50°C (-20°C~+60°C optional)
●    Operating Humidity:          20%~85% RH. (Non condensing)
●    Storage Temperature:       -20°C~+80°C
●    Storage Humidity:   10%~95% RH. (Non condensing)
●    Operating Altitude:            10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:
●    Input connector type         30A/300V UL Approved Gold Plated Brass 1.2t/3-Pin Terminal
●    Input Current                   20.5A/39A(260W) @ Full Load High Line & Low Line
●    Inrush Current                 Less than 50A Cold start @25°C ambient

DC OUTPUT CHARACTERISTICS:

Output

Voltage

Regulation

Output Current

Ripple & Noise

Load

Line

Cross

260W

Min.

Max.

+5V

±3%

±1%

±5%

28A

50mV

+12V

0.5A

20A

120mV

+3.3V

16A

50mV

-12V

±8%

0.1A

120mV

+5VSB

±5%

0.1A

50mV

Max continuous combined load on +3.3V & +5V DC output shall not exceed

180

Watt

Max continuous combined load on +3.3V & +5V & 12V DC output shall not exceed

238

Max continuous total DC output power shall not exceed

260

OVERALL PERFORMANCE:
●    Efficiency                                        65% typical @12V DC Full Load
●    Rise time
●    Power Good Signal                          TTL Compatible signal, on delay 100~500ms, off delay 1ms min
●    Short Circuit Protection (SCP)           All output equipped with SCP (shutdown and latch off)
●    Over Power Protection (OPP)            Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
●    Over Voltage Protection (OVP)         +5V, +12V & +3.3V

RELIABILITY:
●    MTBF (Mean Time Between Failure): 100,000 hours @max. Load, 12V DC & 25°C ambient
●    Safety Standards:                            Meet UL60950 and TüV EN60950
●    Safety Approved:
●    EMI Compatibility (EMC) Standard:    FCC Part 15 Class B, CISPR22 (EN55022) Class B (CE mark)
●    Dielectric Withstand:                        Input to Output: 500VDC for 1second
●    Dielectric Withstand:          Input to frame ground: 500VDC for 1second
●    Leakage Current:            <0.005μA @12VDC

Output Connector specific:
●    ATX 24 Pin x1:      Molex29-01-2240 or equivalent
●    +12V(P4) 4 pin x1:       Molex 39-01-2040 or equivalent
●    HDD, DVD 4 pin x8:    Molex 8981-04P or equivalent
●    FDD 4 pin x1:      AMP171822-4 or equivalent
●    Serial ATA x2:   Molex 675820000 or equivalent
●    Process EPS 8 Pins x1                    Molex 39-01-2080 or equivalent

Standard Output Cable Length:
●    270mm (10.62 inches)

Power chassis Dimension:
●    130(L) x 125(W) x 67(H) mm / 5.11(L) x 4.92(W) x 2.64(H) Inches

Screw hole
●    Front Panel with 4 screw holes
●    Rear Panel bracket with 2 screw holes

Net Weight:
●    1.56 kg / 3.438 lbs

Gross Weight:
●    2~2.4 kg / 4.4~5.29 lbs

Packing Detail
●    8 PCs

Measurement of Carton
●    1.49 Cuft / 0.049 Cubic meter

DOWNLOAD_specification_SFX_STC-12260SFX.pdf

Dealer: Test autor

Add to collections