Product: 400W Single Output Industrial DC to DC converter (100mm width) |
|
|
Series
| Model No.
| Output Watts
| Input Voltage | Input range
| 48
| STC-4840012I
| 400W continuous | ±48V DC
| ±36V ~ ±72V DC
| 24
| STC-2440012I | 400W continuous | ±24V DC
| ±19V ~ ±35V DC | 12
| STC-1225012I | 250W continuous | ±12V DC | ±9V ~ ±18V DC | 6
| STC-0625012I | 250W continuous | ±6V DC
| ±4.5V ~ ±9V DC |
ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling, 38x38x25mm Fan x 2 (With 2 Ball Bearing) ● Fan brand: DELTA, NMB, SUNON, SUNON IP68 (for H version). Specifications are equivalent
● Operating Temperature: 0°C ~ +50°C (-20°C~+60°C optional) Full Load
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature: -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
● Input connector type: 40A/ 300V Single table type Terminal x 2
● Input Current:
36A/72A | 250W @6V DC input | 18A/36A | 250W @12V DC input | 15A/30A | 400W @24V DC input |
@ Full Load High Line & Low Line
● Inrush Current: Less than 10A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
Output Voltage | Regulation | Output Current table
| Ripple & Noise | Load | Line | Cross | 400W | 250W | Min. | Max. | Min. | Max. | +5V | ±5% | ±1% | ±5% | 0A | 80A | 0A | 50A | 50mV | +12V | 0A | 33A | 0A | 20A | 120mV | +24V | 0A | 16.6A | 0A | 10.4A | 240mV | Maximum continuous total DC output power shall not exceed | 400 | 250 | Wattage |
OVERALL PERFORMANCE:
● Efficiency: 70~75% typical @6V DC Input Full Load 75% typical @12V, 24V DC Input Full Load 80% typical @48V DC Input Full Load
● Hold up time:
● Rise time:
● Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP): Output is equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdn and latch off)
● Over Voltage Protection (OVP): +5V or 12V or 24V DC
RELIABILITY:
● MTBF (Mean Time Between Failure): 95 000 hours @max. Load, 6V DC & 25°C ambient
● Safety Standards: Meet IEC60950-1, EN60950-1
● Safety Approved:
● EMI Compatibility (EMC) Standard: EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014, EN61000-3-3:2013, EN55024:2010 +A1:2015 ISOLATION: ● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand INPUT to OUTPUT: 500V DC for 60 seconds
● Dielectric Withstand INPUT to frame GROUND: 500V DC for 60 seconds
● Leakage Current: <0.005μA @6V, 12V, 24v, 48V DC
Output Connector specific:
● 25A/300V UL Approved 3-Pin Terminal
Power chassis Dimension: ● 270(L) x 100(W) x 40.5(H) mm / 10.63(L) x 3.94(W) x 1.59(H) Inches
Net Weight:
● 2 kg / 4.411 Lbs
Gross Weight:
● 2.1 ~ 2.4 kg / 4.63 ~ 5.29 Lbs
Packing Detail:
● 8 pcs
Measurement of Carton:
● 0.028 m³ / 1 Cuft
Optional Input Connector pictures:
SPECIFICATIONS:
|
Dealer: Synoceantech |
|
Add to collections |
|
|
|