Welcome, Guest
login:
password:
memorize:
Register
Forgot password ?
 Product: 13.8V/27.6V DC Fanless Switching Mode Battery Charger
Category: Fanless Battery charger
13.8V/27.6V DC Fanless Switching Mode Battery Charger
 Model No. Output Watts Input Voltage Max Inrush current
 Frequency
 STC-X70 173 Watts 110/220V AC 80A/40A@220V AC/ 110V AC 47~63 Hz
 STC-X80 173 Watts 110/220V AC 80A/40A@220V AC/ 110V AC 47~63 Hz


ENVIRONMENTAL CONDITIONS:
●    Cooling:                                 Natural convection
●    Temperature sensor:               85°/95°/105° Celsius
●    Operating Temperature:          0°C~+50°C Full Load
●    Operating Humidity:               20%~85% RH. (Non condensing)
●    Storage Temperature:            -20°C~+80°C
●    Storage Humidity:                  10%~90% RH. (Non condensing)
●    Operating Altitude:                 Sea level to Above Sea level 4000M

DC OUTPUT CHARACTERISTICS:
Model No. STC-X70 STC-X80
 Output system voltage (VDC) 12~14.8 27.6
 Maximum load (Amps) (Constant current)    
 12.5 6.25
 Minimum load (Amps)    
 0.2 0.2
 Ripple/Noise (mV)    
140
290
 Line regulation    
±1% ±1%
 Load regulation    
±3%±3%
 Maximim output not exceed    
 173W 173W

OVERALL PERFORMANCE:
●    Efficiency:                                    80% typical @110/230V AC Full Load
●    Short Circuit Protection (SCP):       All output equipped with SCP (shutdown and latch off)
●    Over Power Protection (OPP):        Peak power protected to 130~150% of continuous rated power (shutdown and latch off)
●    Over Voltage Protection (OVP):     +12V@ 15.6~16.8V DC/ +24V@ 31.2~33.6V DC
●    Auto off charger protection:          When the battery full load, the charger will not load to battery

RELIABILITY:
●    MTBF (Mean Time Between Failure):  75 000 hours @Max.Load,110/220V AC @25°C
●    Safety Standards:                            Meet IEC60950-1, EN60950-1
●    Safety Approved:        
●    EMI Compatibility (EMC) Standard:    EN55032:2015/AC:2016, CISPR32:2015, EN61000-3-2:2014, 
                                                            EN61000-3-3:2013, EN55024:2010 +A1:2015
ISOLATION:
●    INPUT and OUTPUT are isolated by transformers and optical couplers
●    Dielectric Withstand:                        INPUT to OUTPUT: 1500V AC for 60 seconds
●    Dielectric Withstand:                        INPUT to frame GROUND: 1500V AC for 60 seconds
●    Leakage Current:                            <0.005μA @ 264V AC


Auto shutdown Temperature sensor protection:
●    Temperature sensor 95 degree Celsius, auto recovery

Output Device Connector Specific:
●    One set Red and Black 10AWG UL 1007 with Y type connector

Standard Output Cable Length From Chassis:
●    200 mm / 7.87 Inches

Power Chassis Dimension:
●    180(L) x 110(W) x 71(H) mm / 7.087(L) x 43.30(W) x 27.95(H) Inches

Net Weight:
●    1.4 kgm / 3.086 Lbs

Gross Weight:
●    1.6 kgs / 3.526 Lbs

Packing Detail:
●    8 pcs and 12pcs optional

Measurement of Carton:
●    0.0425 m³ / 1.5 Cuft


SPECIFICATIONS:
Dealer: Synoceantech
Add to collections
Statistics


Administration